B300 vs RTX A6000: Specs, VRAM & Price
Short answer: choose the B300 when 288 GB of VRAM is the gating requirement. Choose the RTX A6000 when 48 GB is enough for the workload and the lower hourly rate points that way.
The B300 has 288 GB of VRAM; the RTX A6000 has 48 GB.
You can rent both by the hour, no purchase required. B300 from $9.89/GPU/hr; RTX A6000 from $0.363/GPU/hr. The RTX A6000 is 96% cheaper at the entry rate.
B300
Good for training and serving frontier-scale LLMs
RTX A6000
Good for training and inference on models that don't need FP8 kernels
Last updated: 2026-10-10 22:00:42 UTCRefreshes hourly
Specs side by side
| Spec | B300 | RTX A6000 |
|---|---|---|
| VRAM | 288 GB | 48 GB |
| Memory bandwidth | – | 768 GB/s |
| Architecture | Blackwell Ultra | Ampere |
| Compute capability | 10.3 | 8.6 |
| Precisions in hardware | FP32, FP16, BF16, FP8, INT4 | FP32, FP16, BF16, INT4 |
| NVLink / multi-GPU interconnect | – | NVLink, 2-way |
| Max board power (TDP) | – | 300W |
| Regions | 1 | 4 |
On-demand price
| Rate | B300 | RTX A6000 |
|---|---|---|
| Lowest per GPU/hr | $9.89/GPU/hr | $0.550/GPU/hr |
Which is better for AI: B300 or RTX A6000?
Choose the B300 when 288 GB of VRAM is the gating requirement. Choose the RTX A6000 when 48 GB is enough for the workload and the lower hourly rate points that way.
B300 vs RTX A6000: common questions
Is the B300 or the RTX A6000 better for AI?
Short answer: choose the B300 when 288 GB of VRAM is the gating requirement. Choose the RTX A6000 when 48 GB is enough for the workload and the lower hourly rate points that way.
Is the B300 or the RTX A6000 cheaper to rent?
On Aquanode's live marketplace the B300 starts at $9.89/GPU/hr (median $9.89/GPU/hr) and the RTX A6000 starts at $0.363/GPU/hr (median $0.626/GPU/hr). The RTX A6000 is the cheaper of the two at the entry rate, by 96%.
What is the difference between the B300 and the RTX A6000?
The B300 has 288 GB of VRAM against the RTX A6000's 48 GB; the B300 is a Blackwell Ultra part and the RTX A6000 is Ampere (compute capability 10.3 vs 8.6); only the B300 supports FP8 compute. On price, the B300 lists from $9.89/GPU/hr and the RTX A6000 from $0.363/GPU/hr.
How widely available are the B300 and the RTX A6000?
The B300 is listed in 1 region and the RTX A6000 in 4 regions right now.
How much does 1,000 GPU-hours cost on the B300 vs the RTX A6000?
At the lowest rates listed today, 1,000 GPU-hours costs $9,889 on the B300 and $363 on the RTX A6000, a difference of $9,526 for the same runtime. Rates are per GPU per hour and update hourly.
How much VRAM does the B300 have compared to the RTX A6000?
The B300 has 288 GB of VRAM; the RTX A6000 has 48 GB.
How this comparison is calculated
Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.
Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.
Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own B300 page and RTX A6000 page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.
Go further
Check what fits in each card's memory with the B300 VRAM calculator and the RTX A6000 VRAM calculator, or browse every model by generation in the GPU index.
More B300 comparisons
More RTX A6000 comparisons
Related reading: H100 pricing and specs, H100 vs H200, A100 vs H100, H100 and H200: SXM vs NVL vs PCIe, and The best GPUs for AI, ranked.
