H200 vs RTX A4500: Specs, VRAM & Price

Short answer: choose the H200 when 141 GB of VRAM is the gating requirement. Choose the RTX A4500 when 20 GB is enough for the workload and the lower hourly rate points that way.

The H200 has 141 GB of VRAM; the RTX A4500 has 20 GB.

You can rent both by the hour, no purchase required. H200 from $3.95/GPU/hr; RTX A4500 from $0.209/GPU/hr. The RTX A4500 is 95% cheaper at the entry rate.

H200

Good for training and serving frontier-scale LLMs

$3.95/hr
Lowest / GPU
$5.82/hr
Median / GPU
141 GB
VRAM
Hopper
Architecture

RTX A4500

Good for inference and small-scale training workloads

$0.209/hr
Lowest / GPU
$0.242/hr
Median / GPU
20 GB
VRAM
Ampere
Architecture

Last updated: 2026-10-10 21:19:09 UTCRefreshes hourly

Specs side by side

SpecH200RTX A4500
VRAM141 GB20 GB
Memory bandwidth4.8 TB/s–
ArchitectureHopperAmpere
Compute capability9.0–
Precisions in hardwareFP32, FP16, BF16, FP8, INT4FP32, FP16, BF16, INT4
Peak FP16/BF16 tensor TFLOPS989 TFLOPS–
Peak FP8 tensor TFLOPS1,979 TFLOPS–
NVLink / multi-GPU interconnectNVLink 4, 900 GB/s bidirectional–
Max board power (TDP)Up to 700W (configurable)–
Form factorSXM–
Regions51

On-demand price

RateH200RTX A4500
Lowest per GPU/hr$3.98/GPU/hr$0.275/GPU/hr

Which is better for AI: H200 or RTX A4500?

Choose the H200 when 141 GB of VRAM is the gating requirement. Choose the RTX A4500 when 20 GB is enough for the workload and the lower hourly rate points that way.

H200 vs RTX A4500: common questions

Is the H200 or the RTX A4500 better for AI?

Short answer: choose the H200 when 141 GB of VRAM is the gating requirement. Choose the RTX A4500 when 20 GB is enough for the workload and the lower hourly rate points that way.

Is the H200 or the RTX A4500 cheaper to rent?

On Aquanode's live marketplace the H200 starts at $3.95/GPU/hr (median $5.82/GPU/hr) and the RTX A4500 starts at $0.209/GPU/hr (median $0.242/GPU/hr). The RTX A4500 is the cheaper of the two at the entry rate, by 95%.

What is the difference between the H200 and the RTX A4500?

The H200 has 141 GB of VRAM against the RTX A4500's 20 GB; the H200 is a Hopper part and the RTX A4500 is Ampere; only the H200 supports FP8 compute. On price, the H200 lists from $3.95/GPU/hr and the RTX A4500 from $0.209/GPU/hr.

How widely available are the H200 and the RTX A4500?

The H200 is listed in 5 regions and the RTX A4500 in 1 region right now.

How much does 1,000 GPU-hours cost on the H200 vs the RTX A4500?

At the lowest rates listed today, 1,000 GPU-hours costs $3,949 on the H200 and $209 on the RTX A4500, a difference of $3,740 for the same runtime. Rates are per GPU per hour and update hourly.

How much VRAM does the H200 have compared to the RTX A4500?

The H200 has 141 GB of VRAM; the RTX A4500 has 20 GB.

How this comparison is calculated

Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.

Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.

Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own H200 page and RTX A4500 page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.

Go further

Check what fits in each card's memory with the H200 VRAM calculator and the RTX A4500 VRAM calculator, see vendor-published throughput in the GPU benchmarks and specs table, or browse every model by generation in the GPU index.

Submit the job. Everything after that is ours.

Sign up in 60 seconds. Pay for the GPU minutes you actually use.

© 2026 Aquanode. All rights reserved.

All trademarks, logos and brand names are the property of their respective owners.