L40 vs RTX 3060: Specs, VRAM & Price
Short answer: choose the L40 when 48 GB of VRAM is the gating requirement. Choose the RTX 3060 when 12 GB is enough for the workload and the lower hourly rate points that way.
The L40 has 48 GB of VRAM; the RTX 3060 has 12 GB.
You can rent both by the hour, no purchase required. L40 from $0.850/GPU/hr; RTX 3060 from $0.132/GPU/hr. The RTX 3060 is 84% cheaper at the entry rate.
L40
Good for fine-tuning mid-size models and high-throughput inference
RTX 3060
Good for inference and small-scale training workloads
Last updated: 2026-10-16 UTCRefreshes every 6 hours
Specs side by side
| Spec | L40 | RTX 3060 |
|---|---|---|
| VRAM | 48 GB | 12 GB |
| Memory bandwidth | 864 GB/s | – |
| Architecture | Ada Lovelace | Ampere |
| Compute capability | 8.9 | 8.6 |
| Precisions in hardware | FP32, FP16, BF16, FP8, INT4 | FP32, FP16, BF16, INT4 |
| Peak FP16/BF16 tensor TFLOPS | 181.05 TFLOPS | – |
| Peak FP8 tensor TFLOPS | 362 TFLOPS | – |
| Max board power (TDP) | 300W | – |
| Form factor | – | PCIe 4.0 x8 |
| Regions | 2 | 1 |
On-demand price
| Rate | L40 | RTX 3060 |
|---|---|---|
| Lowest per GPU/hr | $0.850/GPU/hr | $0.231/GPU/hr |
Which is better for AI: L40 or RTX 3060?
Choose the L40 when 48 GB of VRAM is the gating requirement. Choose the RTX 3060 when 12 GB is enough for the workload and the lower hourly rate points that way.
L40 vs RTX 3060: common questions
Is the L40 or the RTX 3060 better for AI?
Short answer: choose the L40 when 48 GB of VRAM is the gating requirement. Choose the RTX 3060 when 12 GB is enough for the workload and the lower hourly rate points that way.
Is the L40 or the RTX 3060 cheaper to rent?
On Aquanode's live marketplace the L40 starts at $0.850/GPU/hr (median $1.03/GPU/hr) and the RTX 3060 starts at $0.132/GPU/hr (median $0.232/GPU/hr). The RTX 3060 is the cheaper of the two at the entry rate, by 84%.
What is the difference between the L40 and the RTX 3060?
The L40 has 48 GB of VRAM against the RTX 3060's 12 GB; the L40 is an Ada Lovelace part and the RTX 3060 is Ampere (compute capability 8.9 vs 8.6); only the L40 supports FP8 compute. On price, the L40 lists from $0.850/GPU/hr and the RTX 3060 from $0.132/GPU/hr.
How widely available are the L40 and the RTX 3060?
The L40 is listed in 2 regions and the RTX 3060 in 1 region right now.
How much does 1,000 GPU-hours cost on the L40 vs the RTX 3060?
At the lowest rates listed today, 1,000 GPU-hours costs $850 on the L40 and $132 on the RTX 3060, a difference of $718 for the same runtime. Rates are per GPU per hour and update hourly.
How much VRAM does the L40 have compared to the RTX 3060?
The L40 has 48 GB of VRAM; the RTX 3060 has 12 GB.
How this comparison is calculated
Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.
Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.
Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own L40 page and RTX 3060 page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.
Go further
Check what fits in each card's memory with the L40 VRAM calculator and the RTX 3060 VRAM calculator, see vendor-published throughput in the GPU benchmarks and specs table, or browse every model by generation in the GPU index.
More L40 comparisons
More RTX 3060 comparisons
Related reading: L40 pricing and specs, The NVIDIA Inception program, explained, Google Colab alternatives for dedicated GPU access, Free GPU credits for students and researchers, and RunPod volume disk vs. network volume, compared.
