Quadro P2000 vs RTX 5060 Ti: Specs, VRAM & Price
Short answer: choose the RTX 5060 Ti when 16 GB of VRAM is the gating requirement. Choose the Quadro P2000 when 5 GB is enough for the workload and availability points that way.
The Quadro P2000 has 5 GB of VRAM; the RTX 5060 Ti has 16 GB.
You can rent both by the hour, no purchase required. Quadro P2000 from $0.277/GPU/hr; RTX 5060 Ti from $0.188/GPU/hr. The RTX 5060 Ti is 32% cheaper at the entry rate.
Quadro P2000
Good for inference workloads on older-generation hardware
RTX 5060 Ti
Good for inference and light fine-tuning workloads
Last updated: 2026-10-10 22:02:39 UTCRefreshes hourly
Specs side by side
| Spec | Quadro P2000 | RTX 5060 Ti |
|---|---|---|
| VRAM | 5 GB | 16 GB |
| Architecture | Pascal | Blackwell |
| Compute capability | 6.1 | 12.0 |
| Precisions in hardware | FP32, FP16 | FP32, FP16, BF16, FP8, INT4 |
| Form factor | PCIe | – |
| Regions | 1 | 1 |
On-demand price
| Rate | Quadro P2000 | RTX 5060 Ti |
|---|---|---|
| Lowest per GPU/hr | $0.277/GPU/hr (cheapest overall) | $0.188/GPU/hr (cheapest overall) |
Which is better for AI: Quadro P2000 or RTX 5060 Ti?
Choose the RTX 5060 Ti when 16 GB of VRAM is the gating requirement. Choose the Quadro P2000 when 5 GB is enough for the workload and availability points that way.
Quadro P2000 vs RTX 5060 Ti: common questions
Is the Quadro P2000 or the RTX 5060 Ti better for AI?
Short answer: choose the RTX 5060 Ti when 16 GB of VRAM is the gating requirement. Choose the Quadro P2000 when 5 GB is enough for the workload and availability points that way.
Is the Quadro P2000 or the RTX 5060 Ti cheaper to rent?
On Aquanode's live marketplace the Quadro P2000 starts at $0.277/GPU/hr (median $0.277/GPU/hr) and the RTX 5060 Ti starts at $0.188/GPU/hr (median $0.251/GPU/hr). The RTX 5060 Ti is the cheaper of the two at the entry rate, by 32%.
What is the difference between the Quadro P2000 and the RTX 5060 Ti?
The Quadro P2000 has 5 GB of VRAM against the RTX 5060 Ti's 16 GB; the Quadro P2000 is a Pascal part and the RTX 5060 Ti is Blackwell (compute capability 6.1 vs 12.0); only the RTX 5060 Ti supports BF16, FP8, INT4 compute. On price, the Quadro P2000 lists from $0.277/GPU/hr and the RTX 5060 Ti from $0.188/GPU/hr.
How widely available are the Quadro P2000 and the RTX 5060 Ti?
The Quadro P2000 is listed in 1 region and the RTX 5060 Ti in 1 region right now.
How much does 1,000 GPU-hours cost on the Quadro P2000 vs the RTX 5060 Ti?
At the lowest rates listed today, 1,000 GPU-hours costs $277 on the Quadro P2000 and $188 on the RTX 5060 Ti, a difference of $90 for the same runtime. Rates are per GPU per hour and update hourly.
How much VRAM does the Quadro P2000 have compared to the RTX 5060 Ti?
The Quadro P2000 has 5 GB of VRAM; the RTX 5060 Ti has 16 GB.
How this comparison is calculated
Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.
Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.
Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own Quadro P2000 page and RTX 5060 Ti page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.
Go further
Check what fits in each card's memory with the Quadro P2000 VRAM calculator and the RTX 5060 Ti VRAM calculator, or browse every model by generation in the GPU index.
More Quadro P2000 comparisons
More RTX 5060 Ti comparisons
Related reading: H100 pricing and specs, H100 vs H200, A100 vs H100, H100 and H200: SXM vs NVL vs PCIe, and The best GPUs for AI, ranked.
