RTX 5090 vs RTX PRO 4000: Specs, VRAM & Price

Short answer: choose the RTX 5090 when 32 GB of VRAM is the gating requirement. Choose the RTX PRO 4000 when 24 GB is enough for the workload and the lower hourly rate points that way.

The RTX 5090 has 32 GB of VRAM; the RTX PRO 4000 has 24 GB.

You can rent both by the hour, no purchase required. RTX 5090 from $0.569/GPU/hr; RTX PRO 4000 from $0.386/GPU/hr. The RTX PRO 4000 is 32% cheaper at the entry rate.

RTX 5090

Good for inference and light fine-tuning workloads

$0.569/hr
Lowest / GPU
$0.880/hr
Median / GPU
32 GB
VRAM
Blackwell
Architecture

RTX PRO 4000

Good for inference and light fine-tuning workloads

$0.386/hr
Lowest / GPU
$0.553/hr
Median / GPU
24 GB
VRAM
Blackwell
Architecture

Last updated: 2026-10-10 21:08:37 UTCRefreshes hourly

Specs side by side

SpecRTX 5090RTX PRO 4000
VRAM32 GB24 GB
Memory bandwidth1,792 GB/s–
ArchitectureBlackwellBlackwell
Compute capability12.012.0
Precisions in hardwareFP32, FP16, BF16, FP8, INT4FP32, FP16, BF16, FP8, INT4
Max board power (TDP)575W–
Form factorPCIe 5.0 x16–
Regions42

On-demand price

RateRTX 5090RTX PRO 4000
Lowest per GPU/hr$1.09/GPU/hr$0.627/GPU/hr

Which is better for AI: RTX 5090 or RTX PRO 4000?

Choose the RTX 5090 when 32 GB of VRAM is the gating requirement. Choose the RTX PRO 4000 when 24 GB is enough for the workload and the lower hourly rate points that way.

RTX 5090 vs RTX PRO 4000: common questions

Is the RTX 5090 or the RTX PRO 4000 better for AI?

Short answer: choose the RTX 5090 when 32 GB of VRAM is the gating requirement. Choose the RTX PRO 4000 when 24 GB is enough for the workload and the lower hourly rate points that way.

Is the RTX 5090 or the RTX PRO 4000 cheaper to rent?

On Aquanode's live marketplace the RTX 5090 starts at $0.569/GPU/hr (median $0.880/GPU/hr) and the RTX PRO 4000 starts at $0.386/GPU/hr (median $0.553/GPU/hr). The RTX PRO 4000 is the cheaper of the two at the entry rate, by 32%.

What is the difference between the RTX 5090 and the RTX PRO 4000?

The RTX 5090 has 32 GB of VRAM against the RTX PRO 4000's 24 GB; both are Blackwell parts; both run BF16, FP8, INT4 workloads in hardware. On price, the RTX 5090 lists from $0.569/GPU/hr and the RTX PRO 4000 from $0.386/GPU/hr.

How widely available are the RTX 5090 and the RTX PRO 4000?

The RTX 5090 is listed in 4 regions and the RTX PRO 4000 in 2 regions right now.

How much does 1,000 GPU-hours cost on the RTX 5090 vs the RTX PRO 4000?

At the lowest rates listed today, 1,000 GPU-hours costs $569 on the RTX 5090 and $386 on the RTX PRO 4000, a difference of $183 for the same runtime. Rates are per GPU per hour and update hourly.

How much VRAM does the RTX 5090 have compared to the RTX PRO 4000?

The RTX 5090 has 32 GB of VRAM; the RTX PRO 4000 has 24 GB.

How this comparison is calculated

Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.

Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.

Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own RTX 5090 page and RTX PRO 4000 page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.

Go further

Check what fits in each card's memory with the RTX 5090 VRAM calculator and the RTX PRO 4000 VRAM calculator, or browse every model by generation in the GPU index.

Submit the job. Everything after that is ours.

Sign up in 60 seconds. Pay for the GPU minutes you actually use.

© 2026 Aquanode. All rights reserved.

All trademarks, logos and brand names are the property of their respective owners.