What GPU do I need to run openvivo/BluePixel-Turbo?
9.1B parameters, published in F32. View on Hugging Face
BluePixel-Turbo is published by openvivo on Hugging Face, with 164 downloads and 38 likes to date. It's a unlisted-architecture model built for image-to-image, published natively in F32.
VRAM required & cheapest live GPU fit
Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.
| Precision | Weight size | Required VRAM | Cheapest live fit | GPUs needed | Est. $/hr (full fit) |
|---|---|---|---|---|---|
| FP32 | 33.8 GB | 40.6 GB | RTX A6000 | 1 | $0.363/hr |
| cheaper alt. | V100 | 3 | $0.330/hr | ||
| FP8 (quantized) | 8.5 GB | 10.1 GB | RTX 5060 Ti | 1 | $0.180/hr |
| INT4 (quantized) | 4.2 GB | 5.1 GB | RTX 3070 | 1 | $0.088/hr |
A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.
INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.
Cheapest way to run BluePixel-Turbo at its published (F32) precision: 1× RTX A6000, at $0.363/hr per GPU ($0.363/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.
BluePixel-Turbo: common questions
Can BluePixel-Turbo run on a single GPU?
Yes, but not on a desktop card. At FP32 it needs 40.6 GB of VRAM, more than a single 32 GB desktop card holds. The cheapest live single-card fit is a 48.0 GB RTX A6000 at $0.363/hr.
Can BluePixel-Turbo run in 16-bit instead of FP32?
Yes. Its published weights are FP32, 33.8 GB, or 40.6 GB once inference overhead is added. Loading the same weights in 16 bits halves that to 16.9 GB, or 20.3 GB with overhead. That moves it onto a 24 GB card, which the FP32 weights do not fit. How much accuracy the cast costs is model-specific and is not measured here.
What is the least VRAM BluePixel-Turbo can run in?
5.1 GB, at INT4 (quantized), which fits a 6 GB card, against 40.6 GB at FP32. That row assumes an INT4 checkpoint has actually been published for this model, so check its Hugging Face page before planning around it.
Does quantizing BluePixel-Turbo lower the GPU bill?
Yes. At FP32 the cheapest live fit is one RTX A6000 at $0.363/hr. At INT4 (quantized) it drops to one RTX 3070 at $0.088/hr, provided a quantized checkpoint exists for it.
Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.
More FLUX.2 models
- FLUX.2-klein-9B (9.1B, BF16)
- flux2-klein-9b-uncensored-text-encoder (8.2B, F16)
- FLUX.2-klein-4B (3.9B, BF16)
- FLUX.2-klein-base-4B (3.9B, BF16)
- FLUX.2-dev (32.2B, BF16)
Lineage
Based on FLUX.2-klein-9B.
Alternatives at this size
Other models for image-to-image within about a third of BluePixel-Turbo's 9.1B parameters, from other model lines.
- Fibo-2.0-edit-turbo (8.1B, BF16)
More on BluePixel-Turbo
Fits on a 48 GB GPU at FP32: every model that fits in 48 GB.
Fits on a 12 GB GPU at FP8: every model that fits in 12 GB.
Fits on an 8 GB GPU at INT4: every model that fits in 8 GB.
Related reading: RTX A6000 pricing and specs, Fast diffusion inference on GPU VMs, What AI inference is, and What AI model fine-tuning is.
ComfyUI on our compute
Rent a GPU with ComfyUI already installed. Your custom nodes and models are there next time.
$29 a month, or pay as you go