What GPU do I need to run kenpath/svara-tts-v1?
3.3B parameters, published in F32. View on Hugging Face
svara-tts-v1 is published by kenpath on Hugging Face, with 197,987 downloads and 55 likes to date. It's a LlamaForCausalLM model built for text-to-speech, published natively in F32.
VRAM required & cheapest live GPU fit
Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.
| Precision | Weight size | Required VRAM | Cheapest live fit | GPUs needed | Est. $/hr (full fit) |
|---|---|---|---|---|---|
| FP32 | 12.3 GB | 14.8 GB | V100 | 1 | $0.110/hr |
| FP8 (quantized) | 3.1 GB | 3.7 GB | RTX 5060 Ti | 1 | $0.165/hr |
| INT4 (quantized) | 1.5 GB | 1.8 GB | RTX 3070 | 1 | $0.088/hr |
A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.
INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.
Cheapest way to run svara-tts-v1 at its published (F32) precision: 1× V100, at $0.110/hr per GPU ($0.110/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.
svara-tts-v1: KV cache by context length
The KV cache is the memory the attention layers hold for every token of context, on top of the weights. It is not part of the flat 1.2x overhead in the table above, grows with context length and with every concurrent request, and is why a long-context deployment needs more VRAM than the table shows.
Grouped-query attention: every layer caches keys and values for a few shared KV heads. Cached per token: 114,688 bytes at 16-bit.
| Context | KV cache, one sequence |
|---|---|
| 4K | 0.44 GB |
| 32K | 3.5 GB |
| 128K | 14.0 GB |
Computed from the layer, head and window counts in the model's own configuration (kenpath/svara-tts-v1), at 16 bits per cached value. Each concurrent sequence needs its own cache, on top of the weights.
svara-tts-v1: common questions
Does svara-tts-v1 fit on a 16 GB GPU?
Yes. At FP32 it needs 14.8 GB of VRAM, so a 16 GB card holds it with 1.2 GB to spare. A 12 GB card is not enough for it at FP32.
Can svara-tts-v1 run in 16-bit instead of FP32?
Yes. Its published weights are FP32, 12.3 GB, or 14.8 GB once inference overhead is added. Loading the same weights in 16 bits halves that to 6.1 GB, or 7.4 GB with overhead. That moves it onto an 8 GB card instead of a 16 GB one. How much accuracy the cast costs is model-specific and is not measured here.
What is the least VRAM svara-tts-v1 can run in?
1.8 GB, at INT4 (quantized), which fits a 6 GB card, against 14.8 GB at FP32. That row assumes an INT4 checkpoint has actually been published for this model, so check its Hugging Face page before planning around it.
Does quantizing svara-tts-v1 lower the GPU bill?
Yes. At FP32 the cheapest live fit is one V100 at $0.110/hr. At INT4 (quantized) it drops to one RTX 3070 at $0.088/hr, provided a quantized checkpoint exists for it.
Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.
More Llama 3.2 models
- orpheus-3b-0.1-ft (3.3B, BF16)
- alloma-3B-Instruct (3.2B, BF16)
- Llama-3.2-3B-Instruct (3.2B, BF16)
- Llama-3.2-3B (3.2B, BF16)
- Llama-3.2-3B-Instruct-pythonic (3.2B, BF16)
Alternatives at this size
Other models for text-to-speech within about a third of svara-tts-v1's 3.3B parameters, from other model lines.
- VoxCPM2 (2.3B, BF16)
- s2-pro (4.6B, BF16)
- higgs-tts-3-4b (4.7B, BF16)
- VibeVoice-1.5B (2.7B, BF16)
- Veena (3.8B, BF16)
More on svara-tts-v1
Fits on a 16 GB GPU at FP32: every model that fits in 16 GB.
Fits on an 8 GB GPU at FP8: every model that fits in 8 GB.
Related reading: V100 pricing and specs, Whisper variants compared, What AI inference is, and What AI model fine-tuning is.
Your own GPU cloud accounts
One console for the GPU clouds you already rent from. Your keys stay on your machine.
$20 a month, flat