What GPU do I need to run llm-jp/llm-jp-3-150m?
152M parameters, published in BF16. View on Hugging Face
llm-jp-3-150m is published by llm-jp on Hugging Face, with 89,386 downloads and 8 likes to date. It's a LlamaForCausalLM model built for text-generation, published natively in BF16.
VRAM required & cheapest live GPU fit
Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.
| Precision | Weight size | Required VRAM | Cheapest live fit | GPUs needed | Est. $/hr (full fit) |
|---|---|---|---|---|---|
| BF16 | 0.3 GB | 0.3 GB | RTX 3060 | 1 | $0.125/hr |
| FP8 (quantized) | 0.1 GB | 0.2 GB | RTX 4070 | 1 | $0.154/hr |
| INT4 (quantized) | 0.1 GB | 0.1 GB | RTX 3060 | 1 | $0.125/hr |
A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.
INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.
Cheapest way to run llm-jp-3-150m at its published (BF16) precision: 1× RTX 3060, at $0.125/hr per GPU ($0.125/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.
llm-jp-3-150m: KV cache by context length
The KV cache is the memory the attention layers hold for every token of context, on top of the weights. It is not part of the flat 1.2x overhead in the table above, grows with context length and with every concurrent request, and is why a long-context deployment needs more VRAM than the table shows.
Multi-head attention: every layer caches keys and values for every head. Cached per token: 24,576 bytes at 16-bit.
| Context | KV cache, one sequence |
|---|---|
| 4K | 0.09 GB |
Computed from the layer, head and window counts in the model's own configuration (llm-jp/llm-jp-3-150m), at 16 bits per cached value. Each concurrent sequence needs its own cache, on top of the weights.
llm-jp-3-150m: common questions
How much VRAM does llm-jp-3-150m need?
0.3 GB at BF16, 0.2 GB at FP8 (quantized), 0.1 GB at INT4 (quantized). All of those sit under 6 GB, the smallest capacity this page reasons about, so VRAM is not what limits where this model runs. The 0.3 GB of weights plus inference overhead is the whole requirement.
How many copies of llm-jp-3-150m fit on one RTX 3060?
35, by VRAM alone. That card carries 12.0 GB and one copy needs 0.3 GB at BF16, on a live rate of $0.125/hr for the whole card. Throughput is not modelled here, so 35 copies is not 35 times the requests served.
Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.
More llm-jp models
- llm-jp-4-33b-thinking (33.2B, BF16)
Alternatives at this size
Other models for text-generation within about a third of llm-jp-3-150m's 152M parameters, from other model lines.
- gpt2 (137M, F32)
- pythia-160m (213M, F16)
- SmolLM2-135M (135M, BF16)
- macbert4csc-base-chinese (102M, F32)
- gpt-neo-125m (150M, F32)
More on llm-jp-3-150m
Fits on an 8 GB GPU at BF16: every model that fits in 8 GB.
Best chat and assistants models: how llm-jp-3-150m ranks against the rest.
Related reading: H100 pricing and specs, How much VRAM you need for LLMs, Serving LLMs with vLLM, vLLM vs TensorRT-LLM vs SGLang, and Best GPU for LLM inference.