What GPU do I need to run google/timesfm-3.0-pytorch?
331M parameters, published in F32. View on Hugging Face
Set up timesfm-3.0-pytorchtimesfm-3.0-pytorch is published by google on Hugging Face, with 0 downloads and 255 likes to date. It's a unlisted-architecture model built for time-series-forecasting, published natively in F32.
VRAM required & cheapest live GPU fit
Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.
| Precision | Weight size | Required VRAM | Cheapest live fit | GPUs needed | Est. $/hr (full fit) |
|---|---|---|---|---|---|
| FP32 | 1.2 GB | 1.5 GB | P4 | 1 | $0.069/hr |
| FP8 (quantized) | 0.3 GB | 0.4 GB | RTX 4080 | 1 | $0.173/hr |
| INT4 (quantized) | 0.2 GB | 0.2 GB | RTX 3060 | 1 | $0.110/hr |
A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.
INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.
Cheapest way to run timesfm-3.0-pytorch at its published (F32) precision: 1× P4, at $0.069/hr per GPU ($0.069/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.
timesfm-3.0-pytorch: common questions
How much VRAM does timesfm-3.0-pytorch need?
1.5 GB at FP32, 0.4 GB at FP8 (quantized), 0.2 GB at INT4 (quantized). All of those sit under 6 GB, the smallest capacity this page reasons about, so VRAM is not what limits where this model runs. The 1.2 GB of weights plus inference overhead is the whole requirement.
Can timesfm-3.0-pytorch run in 16-bit instead of FP32?
Yes. Its published weights are FP32, 1.2 GB, or 1.5 GB once inference overhead is added. Loading the same weights in 16 bits halves that to 0.6 GB, or 0.7 GB with overhead. How much accuracy the cast costs is model-specific and is not measured here.
How many copies of timesfm-3.0-pytorch fit on one P4?
5, by VRAM alone. That card carries 8.0 GB and one copy needs 1.5 GB at FP32, on a live rate of $0.069/hr for the whole card. Throughput is not modelled here, so 5 copies is not 5 times the requests served.
Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.
More on timesfm-3.0-pytorch
Fits on an 8 GB GPU at FP32: every model that fits in 8 GB.
Related reading: H100 pricing and specs, How much VRAM you need for LLMs, and What AI inference is.
