P4 vs RTX 5070 Ti: Specs, VRAM & Price

Short answer: choose the RTX 5070 Ti when 16 GB of VRAM is the gating requirement. Choose the P4 when 8 GB is enough for the workload and the lower hourly rate points that way.

The P4 has 8 GB of VRAM; the RTX 5070 Ti has 16 GB.

You can rent both by the hour, no purchase required. P4 from $0.069/GPU/hr; RTX 5070 Ti from $0.287/GPU/hr. The P4 is 76% cheaper at the entry rate.

P4

Good for inference workloads on older-generation hardware

$0.069/hr
Lowest / GPU
$0.069/hr
Median / GPU
8 GB
VRAM
Pascal
Architecture

RTX 5070 Ti

Good for inference and light fine-tuning workloads

$0.287/hr
Lowest / GPU
$0.426/hr
Median / GPU
16 GB
VRAM
Blackwell
Architecture

Last updated: 2026-10-10 22:02:04 UTCRefreshes hourly

Specs side by side

SpecP4RTX 5070 Ti
VRAM8 GB16 GB
Memory bandwidth–896 GB/s
ArchitecturePascalBlackwell
Compute capability6.112.0
Precisions in hardwareFP32, FP16FP32, FP16, BF16, FP8, INT4
Peak FP16/BF16 tensor TFLOPS–175.8 TFLOPS
Peak FP8 tensor TFLOPS–351.5 TFLOPS
Max board power (TDP)–300W
Form factorPCIe–
Regions11

On-demand price

RateP4RTX 5070 Ti
Lowest per GPU/hr$0.069/GPU/hr (cheapest overall)$0.287/GPU/hr (cheapest overall)

Which is better for AI: P4 or RTX 5070 Ti?

Choose the RTX 5070 Ti when 16 GB of VRAM is the gating requirement. Choose the P4 when 8 GB is enough for the workload and the lower hourly rate points that way.

P4 vs RTX 5070 Ti: common questions

Is the P4 or the RTX 5070 Ti better for AI?

Short answer: choose the RTX 5070 Ti when 16 GB of VRAM is the gating requirement. Choose the P4 when 8 GB is enough for the workload and the lower hourly rate points that way.

Is the P4 or the RTX 5070 Ti cheaper to rent?

On Aquanode's live marketplace the P4 starts at $0.069/GPU/hr (median $0.069/GPU/hr) and the RTX 5070 Ti starts at $0.287/GPU/hr (median $0.426/GPU/hr). The P4 is the cheaper of the two at the entry rate, by 76%.

What is the difference between the P4 and the RTX 5070 Ti?

The P4 has 8 GB of VRAM against the RTX 5070 Ti's 16 GB; the P4 is a Pascal part and the RTX 5070 Ti is Blackwell (compute capability 6.1 vs 12.0); only the RTX 5070 Ti supports BF16, FP8, INT4 compute. On price, the P4 lists from $0.069/GPU/hr and the RTX 5070 Ti from $0.287/GPU/hr.

How widely available are the P4 and the RTX 5070 Ti?

The P4 is listed in 1 region and the RTX 5070 Ti in 1 region right now.

How much does 1,000 GPU-hours cost on the P4 vs the RTX 5070 Ti?

At the lowest rates listed today, 1,000 GPU-hours costs $69 on the P4 and $287 on the RTX 5070 Ti, a difference of $218 for the same runtime. Rates are per GPU per hour and update hourly.

How much VRAM does the P4 have compared to the RTX 5070 Ti?

The P4 has 8 GB of VRAM; the RTX 5070 Ti has 16 GB.

How this comparison is calculated

Every price is normalized to a per-GPU hourly rate using the same pipeline as every other pricing surface on Aquanode, and only the cheapest qualifying offer per provider is shown. A dash means that provider does not currently list that GPU.

Architecture, compute capability and supported precisions come from each vendor's published datasheet for that generation, not from the marketplace feed. This page regenerates at most once per hour.

Memory bandwidth, tensor TFLOPS, NVLink/interconnect and max board power are the same verified-from-datasheet figures shown on each model's own P4 page and RTX 5070 Ti page, which link the primary vendor source for that model. A dash here means Aquanode hasn't verified that figure from a primary source yet, never a guess.

Go further

Check what fits in each card's memory with the P4 VRAM calculator and the RTX 5070 Ti VRAM calculator, or browse every model by generation in the GPU index.

Submit the job. Everything after that is ours.

Sign up in 60 seconds. Pay for the GPU minutes you actually use.

© 2026 Aquanode. All rights reserved.

All trademarks, logos and brand names are the property of their respective owners.