What GPU do I need to run nvidia/Llama-3_3-Nemotron-Super-49B-v1_5-FP8?

49.9B parameters, published in F8_E4M3. View on Hugging Face

49.9B
Parameters
F8_E4M3
Native precision
DeciLMForCausalLM
Architecture
text-generation
Pipeline

Llama-3_3-Nemotron-Super-49B-v1_5-FP8 is published by nvidia on Hugging Face, with 253,435 downloads and 28 likes to date. It's a DeciLMForCausalLM model built for text-generation, published natively in F8_E4M3.

VRAM required & cheapest live GPU fit

Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.

PrecisionWeight sizeRequired VRAMCheapest live fitGPUs neededEst. $/hr (full fit)
FP8 (native)46.4 GB55.7 GBRTX PRO 6000 WS1$1.66/hr
cheaper alt.RTX 5060 Ti4$0.721/hr
INT4 (quantized)23.2 GB27.9 GBA1001$0.462/hr
cheaper alt.RTX A40002$0.333/hr

A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.

INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.

Cheapest way to run Llama-3_3-Nemotron-Super-49B-v1_5-FP8 at its published (F8_E4M3) precision: 1× RTX PRO 6000 WS, at $1.66/hr per GPU ($1.66/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.

Llama-3_3-Nemotron-Super-49B-v1_5-FP8: KV cache by context length

The KV cache is the memory the attention layers hold for every token of context, on top of the weights. It is not part of the flat 1.2x overhead in the table above, grows with context length and with every concurrent request, and is why a long-context deployment needs more VRAM than the table shows.

Multi-head attention: every layer caches keys and values for every head. Cached per token: 2,621,440 bytes at 16-bit.

ContextKV cache, one sequence
4K10.0 GB
32K80.0 GB
128K320.0 GB

Computed from the layer, head and window counts in the model's own configuration (nvidia/Llama-3_3-Nemotron-Super-49B-v1_5-FP8), at 16 bits per cached value. Each concurrent sequence needs its own cache, on top of the weights.

Llama-3_3-Nemotron-Super-49B-v1_5-FP8: common questions

Can Llama-3_3-Nemotron-Super-49B-v1_5-FP8 run on a single GPU?

Yes, but not on a desktop card. At FP8 (native) it needs 55.7 GB of VRAM, more than a single 32 GB desktop card holds. The cheapest live single-card fit is a 96.0 GB RTX PRO 6000 WS at $1.66/hr.

Is Llama-3_3-Nemotron-Super-49B-v1_5-FP8 already quantized?

Yes. It is published in FP8, one byte per parameter, so the 55.7 GB figure is already a quantized footprint rather than a full-precision one. Only INT4 goes below it, at 27.9 GB. A GPU without FP8 tensor cores cannot run it as published, which is why cards here are matched on precision support and not on VRAM alone.

What is the least VRAM Llama-3_3-Nemotron-Super-49B-v1_5-FP8 can run in?

27.9 GB, at INT4 (quantized), which fits a 32 GB card, against 55.7 GB at FP8 (native). That row assumes an INT4 checkpoint has actually been published for this model, so check its Hugging Face page before planning around it.

Does quantizing Llama-3_3-Nemotron-Super-49B-v1_5-FP8 lower the GPU bill?

Yes. At FP8 (native) the cheapest live fit is one RTX PRO 6000 WS at $1.66/hr. At INT4 (quantized) it drops to one A100 at $0.462/hr, provided a quantized checkpoint exists for it.

Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.

More Llama 3.3 models

All 4 Llama 3.3 models: VRAM and GPU requirements

Alternatives at this size

Other models for text-generation within about a third of Llama-3_3-Nemotron-Super-49B-v1_5-FP8's 49.9B parameters, from other model lines.

More on Llama-3_3-Nemotron-Super-49B-v1_5-FP8

Related reading: RTX PRO 6000 WS pricing and specs, How much VRAM you need for LLMs, Serving LLMs with vLLM, vLLM vs TensorRT-LLM vs SGLang, and Best GPU for LLM inference.

Your own GPU cloud accounts

One console for the GPU clouds you already rent from. Your keys stay on your machine.

$20 a month, flat

Connect your accounts

One console for the GPU clouds you already use.

Connect your accounts for $20 a month, flat. Your provider bills the GPU.

© 2026 Aquanode. All rights reserved.

All trademarks, logos and brand names are the property of their respective owners.