What GPU do I need to run ornith-ai/Ornith-1.5-35B-A3B-FP8?
36.0B parameters, published in F8_E4M3. View on Hugging Face
Set up Ornith-1.5-35B-A3B-FP8Ornith-1.5-35B-A3B-FP8 is published by ornith-ai on Hugging Face, with 185,378 downloads and 23 likes to date. It's a Qwen3_5MoeForConditionalGeneration model built for text-generation, published natively in F8_E4M3.
VRAM required & cheapest live GPU fit
Required VRAM = weight size at each precision times a flat 1.2 overhead for activations and fragmentation. The KV-cache grows with context and is not in that factor; it is listed per model below where the architecture is published. Full formula and assumptions: methodology.
| Precision | Weight size | Required VRAM | Cheapest live fit | GPUs needed | Est. $/hr (full fit) |
|---|---|---|---|---|---|
| FP8 (native) | 33.5 GB | 40.2 GB | L40 | 1 | $0.759/hr |
| cheaper alt. | RTX 5060 Ti | 3 | $0.330/hr | ||
| INT4 (quantized) | 16.7 GB | 20.1 GB | RTX A5000 | 1 | $0.176/hr |
A GPU is only matched to a row if its hardware supports that precision, and the primary recommendation is always a single-GPU fit when one exists.
INT4 requires a quantized checkpoint actually published for this model, check its Hugging Face page before relying on this row.
Cheapest way to run Ornith-1.5-35B-A3B-FP8 at its published (F8_E4M3) precision: 1× L40, at $0.759/hr per GPU ($0.759/hr total). Quantizing to FP8 or INT4 (rows above) can cost less, but requires a compatible quantized checkpoint to exist for this model.
Ornith-1.5-35B-A3B-FP8: KV cache by context length
The KV cache is the memory the attention layers hold for every token of context, on top of the weights. It is not part of the flat 1.2x overhead in the table above, grows with context length and with every concurrent request, and is why a long-context deployment needs more VRAM than the table shows.
Hybrid: only the full-attention layers cache per token; the other layers keep a fixed-size state. Cached per token: 20,480 bytes at 16-bit.
| Context | KV cache, one sequence |
|---|---|
| 4K | 0.08 GB |
| 32K | 0.63 GB |
| 128K | 2.5 GB |
| 256K (model maximum) | 5.0 GB |
Computed from the layer, head and window counts in the model's own configuration (ornith-ai/Ornith-1.5-35B-A3B-FP8), at 16 bits per cached value. Each concurrent sequence needs its own cache, on top of the weights.
Ornith-1.5-35B-A3B-FP8: common questions
Can Ornith-1.5-35B-A3B-FP8 run on a single GPU?
Yes, but not on a desktop card. At FP8 (native) it needs 40.2 GB of VRAM, more than a single 32 GB desktop card holds. The cheapest live single-card fit is a 48.0 GB L40 at $0.759/hr.
Is Ornith-1.5-35B-A3B-FP8 already quantized?
Yes. It is published in FP8, one byte per parameter, so the 40.2 GB figure is already a quantized footprint rather than a full-precision one. Only INT4 goes below it, at 20.1 GB. A GPU without FP8 tensor cores cannot run it as published, which is why cards here are matched on precision support and not on VRAM alone.
What is the least VRAM Ornith-1.5-35B-A3B-FP8 can run in?
20.1 GB, at INT4 (quantized), which fits a 24 GB card, against 40.2 GB at FP8 (native). That row assumes an INT4 checkpoint has actually been published for this model, so check its Hugging Face page before planning around it.
Does quantizing Ornith-1.5-35B-A3B-FP8 lower the GPU bill?
Yes. At FP8 (native) the cheapest live fit is one L40 at $0.759/hr. At INT4 (quantized) it drops to one RTX A5000 at $0.176/hr, provided a quantized checkpoint exists for it.
Weight-to-VRAM math, the fit rules, and how live prices are normalized: full methodology.
More Ornith 1 models
- Ornith-1.5-35B-A3B (36.0B, BF16)
- Ornith-1.0-35B-FP8 (35.1B, F8_E4M3)
- Ornith-1.0-35B-AWQ-FP8 (35.1B, F8_E4M3)
- Ornith-1.0-35B-FP8 (35.1B, F8_E4M3)
- Ornith-1.0-35B-FP8 (35.1B, F8_E4M3)
Alternatives at this size
Other models for text-generation within about a third of Ornith-1.5-35B-A3B-FP8's 36.0B parameters, from other model lines.
- Qwen3-32B (32.8B, BF16)
- GLM-4.7-Flash (31.2B, BF16)
- NVIDIA-Nemotron-3-Nano-30B-A3B-BF16 (31.6B, BF16)
- granite-4.1-30b (28.9B, BF16)
- Kimi-Linear-48B-A3B-Instruct (49.1B, BF16)
More on Ornith-1.5-35B-A3B-FP8
Fits on a 48 GB GPU at FP8: every model that fits in 48 GB.
Fits on a 24 GB GPU at INT4: every model that fits in 24 GB.
Related reading: L40 pricing and specs, How much VRAM you need for LLMs, Serving LLMs with vLLM, vLLM vs TensorRT-LLM vs SGLang, and Best GPU for LLM inference.
